ON SALE
13 %
Save $9.55

32bit Arm platform Smooth control board

How to use
1.Copy “firmware.bin” and “config” from config file to SD card (SD smaller than 64Gb)
. Need to change config name .
For example:
Change 1 into 2.
2. Adjust config.txt according to the configuration .
3.Refer to MKS-SBASE PIN , make correction connection. Such as stepper motor ,endstops.
4.Plug the SD card to the board, after power on, it will automatic update .
5.If connect computer with USB, need to install the driver (Refer to below specification ).

$75.00 $65.45

Category: . Model Number: 2016120102 Brand Name: U·SURE Is_customized: YES

Description

3D printer 32bit Arm platform Smooth control board MKS SBASE V1.3 open source MCU-LPC1768 compatible Smoothieware

116910781213

Overview 

MKS SBASE is a latest  motherboard for 3D Printer ,designed by Makserbase (MKS).

It is based  on ARM platform and uses  32bit 100M Cortex-MS MCU-LPC1768.

Features 

1. Using 32bit 100M Cortex-M3 MCU-LPC 1768, and improve its performance highly.

2. Support highly modular open source firmware , easy for secondary development.

3. Support network function, then  proceed remote control via IE Explorer.

4. Using DRV8825 stepper driver which supports 32-microstep and with excellent cooling.

5. Currents of the stepper motor can be set directly, which can avoid the damage .

6. Using high quality FR-4 4 layers PCB and special design for cooling.

7. Using professional power chip, support 12V-24V DC input.

8. Good to work with MKS LCD12864 and MKS TFT touch screen.If you use the other 12864 we can’t sure it can work .

(Can\’t work with MKS MINI12864LCD,OLED12864 and LCD2004 display.)

Wiring

Wiring is based on available information.

HTB1Bus0KVXXXXa5XVXXq6xXFXXXp

MKS SBASE and 12864LCD

HTB1qKleLXXXXXbJXXXXq6xXFXXXZ

MKS SBASE and  MKS TFT Touch Screen

How to use

1.Copy “firmware.bin” and “config” from config file to SD card (SD smaller than 64Gb)
. Need to change config name .

For example:

Change  1  into   2.

2. Adjust config.txt according to the configuration .

3.Refer to MKS-SBASE PIN , make correction connection. Such as stepper motor ,endstops.

4.Plug the SD card to the board, after power on, it will automatic update .

5.If connect computer with USB, need to install the driver (Refer to below specification ).

Install the Driver

First, you should upload the zip file.

Then, plug the USB  to computer . Next, enter device manger .

Then will turn up COM after  install successfully.

Download  Firmware and Update

Please upload firmware (please contact us to receive the firmware link )

Copy configuration (including firmware.bin and config.txt) to SD card, insert to the board and power on, it will automatic update .

After successful updated, the file name will turn into firmware.cur.

Others

1.Support  Gcode. Please refer to <help>G-Codes.htm .

2.Main parameter setting

 It is very easy to set the parameter . First, open config.txt on SD card, then modify  the parameters and save. Re-power on.

 Details on parameter, please refer to Configuration_Options.

Package include:

1 x  MKS SBASE board
1 x USB cable 

 

========================================================================================================================================================================================================================================================================

 

Add a Review