Oops! Il semble que vous avez désactivé Javascript. Pour que vous puissiez voir cette page car elle est destinée à comparaître, nous vous demandons s'il vous plaît ré-activer Javascript!
0 articles - $0.00

Votre panier est vide

Pourquoi ne pas ajouter quelques articles dans notre Boutique
Appelez-nous: +61893758245
EN SOLDES
19 %
sauvegarder $28.11

grenouille 250 PRO fibre de carbone Mini Quadcopter Cadre

Le forfait comprend:(as the main picture)

– 1pcs 250pro 4-Axis Carbon Fiber Quadcopter Frame Kit (not assembeled, just a frame kit)
– 1pcs F3 6DOF Flight Control Board
– 4pcs Littlebee20A
– 4 pcs emax RS2205 (2CCW, 2 CW)
– 1pcs CC3D distribution board
-1 PCS 1000TVL Camera
– 4pcs motor colver
– 2pcs red LED and 2pcs green LED
– 4 pairs 5030 propellers (2 pair green , 2 pair black)
-1set TS5828

$148.36 $120.25

Catégorie: . Utilisation: Vehicles & Remote Control Toys Remote Control Peripherals/Devices: Télécommande Matériel: Composite Material Upgrade Parts/Accessories: Frame RC Parts & Accs: Antennas Technical parameters: Value 2 For Vehicle Type: Airplanes Numéro de modèle: 280 Four-wheel Drive Attributes: Assemblage Tool Supplies: Assembled class Marque: LHI

La description

New 250pro Features:
Main material:100% pure carbon fiber
Wheelbase: 280mm
With rubber damper to decrease vibration during flight
Aluminum alloy spacer, poids léger, reliable
Nouveau 250 Quadcopter Combo Specifications:
Wheelbase: 280mm
la taille: 70mm
Poids: 125g
Caractéristiques:
Full 3K Carbon Fiber Frame
Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
Bumperson the end of the arms to protect the motor during a crash, just like the QAV250.
Easy Lipo Access (suggested Lipo is a 1000mah 3s)
Support for 32mm board cams as well as 26mm cams in cases. (non inclus )
Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session) with optional camera vibration mount (non inclus)
Poids
Frame: 92.5g
SP Racing F3 SPR F3 Flight Controller Board Cleanflight 6DOF 10DOF Arco with Protective Case for FPV Racing 1Quadcopter Frame Better than Naze32 Flip32 RV5 6 DOF&CC3D
Standard Version: Standard model for racing/ acro flying
Deluxe Version: Additional sensors for altitude and direction
Better coding practices and introducing tests, easier to maintain and for future development. (Dominic has software development background)
Many bugs fixed from Baseflight
Supports more flight controllers, including CC3D, CJMCU and Sparky
Supports OneShot ESC and more than 8 RC channels
Product Description
Cleanflight is Open-Source flight controller software which is 32-bit version of the original 8-bit MultiWii code. Caractéristiques
Better coding practices and introducing tests, easier to maintain and for future development. (Dominic has software development background)
Many bugs fixed from Baseflight.
Supports more flight controllers, including CC3D, CJMCU and Sparky.
Supports OneShot ESC and more than 8 RC channels.
Additional PID controllers that uses floating point arithmetic operations. (now has 3 built-in PID Controllers)
Many more features such as RGB LED strip support, Autotune, In-flight PID tuning with your radio, blackbox flight data logging etc.
Specification The hardware was designed by the lead developer of Cleanflight to be more capable than the previous-generation STM32F1-based boards after hearing feedback from the Cleanflight users, contributors and top-pilots.
-36x36mm board with 30.5mm mounting holes
-Weight ~6 grams
-STM32F303 CPU, 72Mhz inc FPU
-High-Capacity Flash (Acro and Deluxe)
-MPU6050 accelerometer/gyro
-MS5611 barometer (Deluxe only)
-HMC5883 compass (Deluxe only) -MicroUSB socket -2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
-8x 3pin though-holes for pin headers for ESC/Servo connections
-2x 4pin though-holes for pin headers for 2x serial ports
-1x 2pin though-holes for pin headers for battery voltage
-1x 2pin though-holes for pin headers for buzzer
-1x 4pin JST-SH socket for I2C
-1x 4pin JST-SH socket for SWD debugging
Le forfait comprend:
1 pcs SP Pro Racing F3 Flight Controller with Brano and Compass& cables& protective case
Caractéristiques:
Flexible motor outputs, support various airframe types:
Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
Jusqu'à 8 ch RC inputsupports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spektrum satellite receivers.
Built in FrSky telemetry inverter (shared w/main port)
Battery voltage monitoring
Modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
Onboard MicroUSB for setup and configuration
LEDs so bright, they could blind you
MultiWii-based configuration software for easy setup
rev5 hardware
Specs:
36×36 mm (30.5mm Mounting)
5.3 grams (no headers, 7.3 grams with)
2000 degrees/second 3-axis MEMS gyro
Tension d'entrée: Max 16V on input rail and up to 35V 6s on the voltage sense line
Le forfait comprend:(as the main picture)
– 1pcs 250pro 4-Axis Carbon Fiber Quadcopter Frame Kit (not assembeled, just a frame kit)
– 1pcs F3 6DOF Flight Control Board
– 4pcs Littlebee20A
– 4 pcs emax RS2205 (2CCW, 2 CW)
– 1pcs CC3D distribution board
-1 PCS 1000TVL Camera
– 4pcs motor colver
– 2pcs red LED and 2pcs green LED
– 4 pairs 5030 propellers (2 pair green , 2 pair black)
-1set TS5828

02

Ajouter un avis